Which 3d Printed Cylinder Head Material Brand Wins?
We compared 3 3d printed cylinder head material options head to head. ABS plastic cylinder head came out on top. See the measured results, the runner-up, the budget pick, and a link to the full test video.
ABS plastic cylinder head
Affiliate link. We may earn a commission at no extra cost to you.
PLA plastic cylinder head
Affiliate link. We may earn a commission at no extra cost to you.
The measured results
Every number below is read straight from the test. Scroll sideways to see all measurements. Products are listed in the order they finished.
| Product | Engine runtime before failure |
|---|---|
| 1ABS plastic 3D printed cylinder head, 12.7 ounces | lasted a combined 1 minute 23 seconds running on a small engine before failing |
| 2PLA plastic 3D printed cylinder head, 15.8 ounces | lasted only 17 seconds running on a small engine before failing |
| 33D printed gasket used with an aluminum cylinder head | lasted over 1 minute before failing |
How it was tested
- running a small engine with a 3D printed ABS plastic cylinder head until failure
- running a small engine with a 3D printed PLA plastic cylinder head until failure
- running a small engine with a 3D printed gasket on an aluminum cylinder head until failure
“i'm really impressed with how the 3d printed products performed especially that abs plastic lasting and combined a minute and 23 seconds while the pla only lasted 17 seconds”
More Myths & Experiments
Which Fuel Saving Devices Brand Wins?
Reduced speed plus increased tire pressure
See the resultsWhich Diesel Fuel Alternative Brand Wins?
5 products tested
See the resultsWhich Turpentine As Engine Fuel Additive Brand Wins?
2 products tested
See the results